- Products -
Products
300ml Silica Gel Filling & Pressure-cap Sealing Machine
Introduction:
300ml Silica Gel Filling & Pressure-cap Sealing Machine is used for the ration filling & sealing of the silica gel into the plastic tube, raveling out the measure inaccuracy, tow tail and the wire drawing by reason of adhesive viscosity, poor mobility and micro leakage. This machine have the inert gases filling set that make the silica gel don’t solidify at the fill course and the deposited course. Also have the air drive to plunger, make sure the sealing tightness.
Specification:
电源电压 Power supply |
220V/50Hz |
气动压力Pneumatic pressure |
4-5kg/cm2 |
耗气量 Gas consumption |
0.3m3/min |
适用塑料管管径 Tube diameter |
φ40-φ50mm |
生产能力Capacity |
10~30pc/min |
灌装量Scope of filling |
200~350ml |
外形尺寸Size |
700×500×1800 |
整机重量 Weight |
100Kg |